Address

Cumhuriyet Mah. 19 Mayıs Cad.
No. 19/23 Antalya

0505 798 79 78
proje@onurtentecam.com

aspendos glass

Bioclimatic Systems, which can be applied in every space, offer folding and gathering movements, which no other sunroof system in the world offers. Thanks to the glass lamellas that can be opened at any angle, it provides the opportunity to benefit from daylight at the desired rate.

Thanks to the folding movement of the glass lamellas, it does not lose its shading feature when ventilating from the roof. Even when the system is open, it provides ventilation without being affected by rain and snow, thanks to specially designed glass lamellas.

Thanks to the folding movement of the glass lamellas, the external cleaning of the lamellas can be cleaned from the inside without the need to go up to the roof. Aluminum parts are colored with electrostatic oven paint; Application is made in any desired color. It is long-lasting thanks to the electrostatic painting. Bioclimatic Systems is the best solution for places such as restaurants and cafes where the smoking ban is enforced.

Technical Specifications
  1. LAMELS USED IN THE SYSTEM ARE USED AS 4+12+4 COMFORT THERMOPANE TEMPERED. SYSTEM WIDTH IS MAXIMUM 300 CM.
  2. Aluminum profiles used in the system are 6063 – T6 F25 (7580 Briner Hardness).
  3. The most important feature of the system is that the lamellas are corrugated inside so that dust, water, etc. on the upper part do not spill down during the movement of the lamellas.
  4. The system can be mounted flat when necessary and inclined when necessary. Since there are grooves on all four sides, water intake is prevented without any inclination. Water is discharged from the front foot profiles.
  5. Panels work axially and have the ability to retract when requested. (This feature is important in terms of making ventilation and shading at the same time)
  6. Thanks to the glass lamellas used in the system, it provides full transparency in the space.
  7. Metal accessories are first galvanized and then painted with electrostatic oven paint. Lamels move comfortably and silently thanks to 608 ZZ stainless bearings.
  8. Panels should be able to be opened at a minimum angle of 100 degrees axially. (It is important to cut off the sunlight coming from the facade)
  9. The opening-closing movement of the ceiling cover can be used with the remote control and optional android or apple control. (Optionally, rain, sun, wind sensors provide comfort for 4 seasons.
  10. All aluminum profiles are painted with electrostatic powder paint technology.
  11. It moves with the T-10 timing belt between the engine and the moving mechanism.
  12. The screws used in the system are chrome-stainless.
  13. Flange application screws must be M8*80 Jacketed Steel dowels and galvanized coating. (In order not to damage the floor insulation)
  14. The wicks to be used in the system are resistant to EPDM heat.
  15. Sealing adhesive is used for waterproofing. 16) The system to be used has 2 (two) years of engine and 2 years of mechanical warranty.
  16. Each system module consists of vertical and horizontal carrier profiles, vertical main carriers must be 128*170*3, horizontal main carriers 128*170*3 mm.
  17. System modules have static properties to meet 50kg+25kg/m² distributed load and 50kg/m² wind load.
  18. Night lighting is provided with the hidden LED application on 4 sides of the system, and the power can be increased or decreased with a dimmer light receiver.